Indoor Substation | Hochiminh City, Vietnam

In these substations, the apparatus is installed within the substation building. Such substations are usually for a voltage up to 22 KV but can be erected for 35KV when the surrounding atmosphere is contaminated with impurities such as metal corroding gases and fumes, conductive dust etc. The switchgear on supply or primary side will consist of oil circuit breakers only.

The high voltage supply is given to the primary of the transformer through circuit breaker. From the bus-bar various feeders emerge out. The panel for each feeder consists of an isolator switch and circuit breaker. In addition to isolator and circuit breaker, the panel is provided with the measuring instruments. As regards protection of feeders usually reverse power relay is employed. For the protection of oil filled transformers with conservator tanks relay is most common.

Quang Anh CGTE build indoor substation or Substations which the apparatus is equipped inside the substation building to fit specific applications from 320KVA through 4000KVA, with primary voltage ratings up to 22kv. In addition, we have three-phase outdoor substations from 320KVA to 4000KVA.

QUANGANHCONS

Substation budget estimate

Select the capacity, route lengths and package to view your indicative budget and electrical parameters.

01 Quick estimate

Substation type Capacity (kVA) Quotation packageIndicative pricing for the selected configuration, excluding VAT. Transformer Overhead MV route length (m)Enter only the overhead section of the route.

Cable and power-factor correction conditions

kVA utilisation before correction (%)Percentage of rated apparent power before correction. Cables and breakers are still selected at transformer rated capacity. Single-core LV cable Transformer-to-breaker installation Ambient temperature (°C)Underground: soil temperature. Above ground: air temperature. Target cosφ after correction cosφ before correctionKeep the suggested value if measured data is unavailable. Transformer impedance uk (%)Use the nameplate value when available.

Live-line connection, multiple transformers/MV feeders or special installation conditions

Request a project quotation

Send your project details, BOQ or drawings to request a formal quotation. Fields marked * are required.

Quotation package Contact name * Phone / Zalo * EmailOptional if you prefer a reply by phone. Company / investor Project location * Project name Transformer / total substation capacity (kVA) Substation type Number of transformers Utility supply voltage MV route type Overhead MV (m) Underground MV (m) Target schedule

BOQ / drawing / site-photo linkShare a Google Drive, OneDrive or document link. Please grant viewing access to the recipient. Project requirements

Reference quick estimate

No quick estimate yet. You can still submit a project quotation request.

I consent to the website operator using the information provided to contact me and process this quotation request.

Quotation scope

Applies to one EVN-supplied substation with oil-immersed transformers at 22/0.4 kV (single-phase: 12.7/0.23 kV), with MV metering VTs/CTs supplied by EVN. The estimate includes the selected equipment, installation, earthing, transformer-to-main-breaker connections, design and connection documentation, and coordination of testing and utility acceptance.

Kiosk, integrated steel-pole and indoor substations include MV switchgear and the entered underground cable route. Other outdoor arrangements use the relevant protection configuration. The final diagram must meet the project connection requirements.

Excludes VAT, cables from the substation switchboard to the MSB/loads, live-line work, harmonic reactors, weak-ground treatment or special piling, land and special fire-protection provisions. Underground routes assume normal construction conditions and exclude road drilling and special reinstatement.

Prices are indicative investment budgets. A formal quotation follows site assessment and agreement on the configuration. Electrical selections are preliminary and require design verification before installation.

Capacity range and application conditions

The catalogue defines the enquiry range of this tool, not universal TCVN capacity limits. Single pole-mounted transformers: 15–100 kVA; three-unit banks: 3×15–3×100 kVA. Platform substations: 100–630 kVA. Steel-pole substations: 100–630 kVA; 750/800 kVA require design verification and local approval. Ground-mounted, kiosk and indoor configurations: 50–10,000 kVA. Not every configuration has a package price or the same structural design.

Reference: EVN Decision 1299/QD-EVN dated 3 November 2017, Volume 1, sections 3.3–3.4. Check the current requirements of the responsible utility before implementation. Kiosks must meet manufacturer ratings and testing requirements (IEC 62271-202); indoor and ground-mounted arrangements must meet project layout, ventilation, structural and fire-protection requirements. For multiple transformers, specify the quantity and capacity of each unit.

Substation budget estimate

Login