永隆變壓器維修:Quanganhcons 的專業服務



Quanganhcons 在永隆提供變壓器維修服務,確保工廠的穩定運行。服務包括從調查、設計到安裝合乎嚴格標準的變電站。

維修流程 Quanganhcons 的變壓器

Quanganhcons 的變壓器維修流程從具體調查開始,以確定技術狀況。接下來是故障處理和必要部件的更換,確保設備安全高效運行。最後,設備經過驗收後交付給客戶。Quanganhcons 總是使用具有明確來源並符合 CO, CQ 標準的電氣設備。。

Quanganhcons 變壓器維修的主要目標是迅速解決故障並保持電力系統的性能。首先,Quanganhcons 專注於通過更換損壞的變壓器配件,確保安全運行,以識別和恢復變壓器的功能。

維修流程包括幾個主要步驟:

  1. 恢復性能: Quanganhcons 快速確定影響變壓器運行的故障並在最短時間內更換必要的變壓器配件。

  2. 降低風險: 始終優先採取措施減低與電力故障相關的風險,確保用戶安全並保護客戶資產。

  3. 變壓器租賃服務: 在維修過程中,Quanganhcons 提供經過檢查的變壓器租賃服務,確保系統不中斷。

雖然沒有詳細描述變壓器維修流程中的每一步,但基本工作如調查、檢查、清潔和電力測試都得到了執行,與常見的工業流程相似。這些操作幫助優化性能並提高客戶電力系統的可靠性。目前,保持電力穩定是每個企業的關鍵因素,Quanganhcons 不斷努力以確保這一點。

Quanganhcons 工程師檢查變壓器。

Quanganhcons 專業變壓器維修流程。

永隆變電站施工

Quanganhcons 專門在永隆進行變電站施工,涵蓋如挂式變電站、桁架站和單體鋼桿站等類型。所選的變壓器產品來自如 Thibidi、Siemens、ABB 等知名品牌,確保設備的高效和長壽命。

永隆省正積極推動大型變電站施工項目,旨在提高地方電力供應的質量和效率。最顯著的項目是位於三平縣和盛社的 220kV 變電站 永隆 3,容量達 500 MVA。預計該變電站施工於 2026 年第一季度開始,並於 2027 年第一季度完成,總投資逾 4330 億越盾。該項目的目標是應對快速增長的負荷需求,減少電網系統的損失及避免 220kV 接入線路超載。

此前,2013 年完成了永隆-茶榮 220kV 線路及 220/110kV 茶榮變電站的工程,費用超過 7230 億越盾。這條線路長達 62 公里,連接永隆變電站和茶榮,幫助改進區域電力傳輸能力。

2025 年,也展開了一個新項目:平明 110kV 變電站,總投資超過 460 億越盾,預計於 2025 年 3 月完成。該變電站的角色是減少附近變電站的負載,調節 22 kV 的負荷,滿足如和富、平明、松富、富安等省內工業區日益增長的需求。

運營技術也得到現代化,通過先進的 SCADA 系統進行遠程監控和操作,適用於永隆的所有 110kV 變電站。SCADA 系統不僅提高了供電的可靠性,還減少了客戶的斷電故障。此外,系統也支持遠程監控 22kV 輸電線路,顯著改善了 SAIFI 和 SAIDI 指數,證明當地電網的現代化和效率提升。

總的來看,永隆變電站施工聚焦於幾個主要方面:構建高容量的新變電站(110kV 和 220kV),升級傳輸系統以減低超載,並現代化電力線路的監控技術。

永隆變壓站施工圖。

由 Quanganhcons 施工變電站。

變壓器定期保養

定期保養在保持變壓器穩定運行和延長壽命方面發揮著重要作用。Quanganhcons 專注於執行保養以最大限度地減少風險並保持電廠的穩定性,為其他設備持續高效運行創造條件。

變壓器定期保養是一個重要的過程,旨在保持運行性能和延長設備壽命。此過程包括不同的工序,如檢查、清潔及測試,以確保變壓器的功能始終良好。

通常每 3 個月安排一次變壓器定期檢查,以監控油量和矽膠狀況,並檢測油漏及記錄結果。全面保養通常每六個月或一年一次,具體取決於運行條件。

定期保養的過程可以總結為以下步驟:

  1. 詳細調查和評估變壓器的運行情況。
  2. 檢查高壓電纜、低壓電纜、鐵芯、冷卻風扇及端頭、連接點。
  3. 全面清洗變電站,包括鐵芯、殼體、套管及冷卻風扇等部件。
  4. 檢查機器內油溫和油面,使用傳感器和儀表。
  5. 測試油樣以分析質量,檢測異物和濕度,以及油的分解情況。
  6. 緊固連接頭和端頭,確保持久接觸。
  7. 檢查絕緣值,確保零部件間的絕緣符合標準。
  8. 清洗和檢查 AC、DC 電源系統及控制箱內部電路板。
  9. 檢查矽膠並在必要時更換,處理所有油漏問題。
  10. 如進行大修,需更換絕緣油,為機器乾燥內核,並按嚴格標準檢查技術參數。

變壓器保養的正確過程有助於防止故障、提高運行可靠性,同時有效管理變壓器壽命。這是高壓電氣設備系統管理中的必要工作,以確保整個系統的連續和穩定運行。

工程師進行變壓器保養。

Quanganhcons 定期進行變壓器保養。

Quanganhcons 在永隆提供全面的變壓器維修解決方案,確保技術和運行的有效性。從調查到保養的服務幫助優化投資並穩定運行電力能源。

立即撥打熱線:+84 9 1975 8191 與 Quanganhcons 聯繫,以獲取永隆信譽的變壓器維修服務建議。

Quanganhcons 專業提供變壓器的維修和保養服務,以及在永隆的多元化變電站施工服務,確保國際標準和品質。

QUANGANHCONS

Substation budget estimate

Select the capacity, route lengths and package to view your indicative budget and electrical parameters.

01   Quick estimate

Cable and power-factor correction conditions
Request a project quotation

Send your project details, BOQ or drawings to request a formal quotation. Fields marked * are required.

Reference quick estimate
No quick estimate yet. You can still submit a project quotation request.

Quotation scope

Applies to one EVN-supplied substation with oil-immersed transformers at 22/0.4 kV (single-phase: 12.7/0.23 kV), with MV metering VTs/CTs supplied by EVN. The estimate includes the selected equipment, installation, earthing, transformer-to-main-breaker connections, design and connection documentation, and coordination of testing and utility acceptance.

Kiosk, integrated steel-pole and indoor substations include MV switchgear and the entered underground cable route. Other outdoor arrangements use the relevant protection configuration. The final diagram must meet the project connection requirements.

Excludes VAT, cables from the substation switchboard to the MSB/loads, live-line work, harmonic reactors, weak-ground treatment or special piling, land and special fire-protection provisions. Underground routes assume normal construction conditions and exclude road drilling and special reinstatement.

Prices are indicative investment budgets. A formal quotation follows site assessment and agreement on the configuration. Electrical selections are preliminary and require design verification before installation.

Capacity range and application conditions

The catalogue defines the enquiry range of this tool, not universal TCVN capacity limits. Single pole-mounted transformers: 15–100 kVA; three-unit banks: 3×15–3×100 kVA. Platform substations: 100–630 kVA. Steel-pole substations: 100–630 kVA; 750/800 kVA require design verification and local approval. Ground-mounted, kiosk and indoor configurations: 50–10,000 kVA. Not every configuration has a package price or the same structural design.

Reference: EVN Decision 1299/QD-EVN dated 3 November 2017, Volume 1, sections 3.3–3.4. Check the current requirements of the responsible utility before implementation. Kiosks must meet manufacturer ratings and testing requirements (IEC 62271-202); indoor and ground-mounted arrangements must meet project layout, ventilation, structural and fire-protection requirements. For multiple transformers, specify the quantity and capacity of each unit.

Developed by QuangAnhcons · © 2026 QuangAnhcons. Code licensed under GPL-2.0-or-later. Standards and manufacturer data belong to their respective owners.